Product Categories
All Products
-
Stainless steel burner
Gas burner, also known as gas-fired heating boilers and gas bath boilers, gas boiler, as the name suggests refers to the fuel for the gas boiler, gas boiler and oil-fired boiler, gas boiler, gas boiler, gas boiler, Electric boilers are the most economical, so most people have chosen the gas boiler as the steam, heating, bathing with the boiler equipment. The gas boiler includes KS-Q gas water boiler, CLHS (CWNS) gas hot water boiler, LHS (WNS) gas steam boiler and so on. The gas hot water boiler includes gas heating boiler and gas bath boiler. "The realization of the project, gas-fired boiler has gradually become the first choice.
-
Brass burner
Gas burner, also known as gas-fired heating boilers and gas bath boilers, gas boiler, as the name suggests refers to the fuel for the gas boiler, gas boiler and oil-fired boiler, gas boiler, gas boiler, gas boiler, Electric boilers are the most economical, so most people have chosen the gas boiler as the steam, heating, bathing with the boiler equipment. The gas boiler includes KS-Q gas water boiler, CLHS (CWNS) gas hot water boiler, LHS (WNS) gas steam boiler and so on. The gas hot water boiler includes gas heating boiler and gas bath boiler. "The realization of the project, gas-fired boiler has gradually become the first choice.
-
Gas thermocouple
Thermocouple is a temperature sensor, is an instrument, it directly measures the temperature, and the temperature signal into a thermoelectric power signal, through the electrical instrument (secondary instrument) into the measured medium temperature. The basic principle of thermocouple temperature measurement is composed of two different components of the material composition of the closed loop conductor, when there is temperature gradient at both ends, the circuit will have a current through, then between the two ends there Seebeck electromotive force - thermal EMF, This is the so-called Seebeck effect. Two different components of the homogeneous conductor for the hot electrode, the higher the temperature end of the work side, the lower end of the temperature free end, the free end is usually at a constant temperature. According to the thermoelectromotive force and temperature as a function of the thermocouple indexing table; indexing table is the free end temperature at 0 ℃ under the conditions obtained, different thermocouples with different index table.
-
Patio heater thermocouple
What’s thermocouple and it’s basic principle Thermocouple is a temperature sensor, is an instrument, it directly measures the temperature, and the temperature signal into a thermoelectric power signal, through the electrical instrument (secondary instrument) into the measured medium temperature. The basic principle of thermocouple temperature measurement is composed of two different components of the material composition of the closed loop conductor, when there is temperature gradient at both ends, the circuit will have a current through, then between the two ends there Seebeck electromotive force - thermal EMF, This is the so-called Seebeck effect. Two different components of the homogeneous conductor for the hot electrode, the higher the temperature end of the work side, the lower end of the temperature free end, the free end is usually at a constant temperature. According to the thermoelectromotive force and temperature as a function of the thermocouple indexing table; indexing table is the free end temperature at 0 ℃ under the conditions obtained, different thermocouples with different index table.
-
Stove thermocouple
What’s thermocouple and it’s basic principle Thermocouple is a temperature sensor, is an instrument, it directly measures the temperature, and the temperature signal into a thermoelectric power signal, through the electrical instrument (secondary instrument) into the measured medium temperature. The basic principle of thermocouple temperature measurement is composed of two different components of the material composition of the closed loop conductor, when there is temperature gradient at both ends, the circuit will have a current through, then between the two ends there Seebeck electromotive force - thermal EMF, This is the so-called Seebeck effect. Two different components of the homogeneous conductor for the hot electrode, the higher the temperature end of the work side, the lower end of the temperature free end, the free end is usually at a constant temperature. According to the thermoelectromotive force and temperature as a function of the thermocouple indexing table; indexing table is the free end temperature at 0 ℃ under the conditions obtained, different thermocouples with different index table.
-
Oven thermocouple
Gas oven thermocouple installation precautions 1. With a thermocouple stove requirements installed in a well-ventilated kitchen, it minimum distance of 1m with the cylinder, but the maximum length of the intake hose should not exceed 2m, stove below and around do not stack flammable items. 2. with a thermocouple of the stove should be placed in the stove is not easy to burn, the height of the stove is generally 70cm. It should be placed in a smooth, under the air into the stove embedded in the installation of cooking stove to be used in the cabinet side wall or anterior wall to open a considerable area of 80cm air inhalation holes, in order to prevent rats from entering the metal mesh should be installed when the device is equipped with the following Baffle, the battery should be reserved for replacement. 3. Stove the back of the wall with a net distance of not less than 10cm, the side wall from the wall is not less than 20cm; if the wall is flammable material, to be affixed to the fire insulation layer, the fire side and stove more Part of not less than 20cm, more than a part of the stove is not less than 80cm. 4. Intake pipe connection must be sealed with a hose connection must take the hose in place, and clamped with a clamp, with soap liquid check should be no leakage. Gas stove with thermocouple In the use of pulse ignition stove, before use should be installed according to positive and negative requirements of the battery. When using the ignition of the "pop" sound becomes slow, the point does not fire, or even point the fire immediately go out, you should replace the battery.
-
Copper thermocouple
What’s thermocouple and it’s basic principle Thermocouple is a temperature sensor, is an instrument, it directly measures the temperature, and the temperature signal into a thermoelectric power signal, through the electrical instrument (secondary instrument) into the measured medium temperature. The basic principle of thermocouple temperature measurement is composed of two different components of the material composition of the closed loop conductor, when there is temperature gradient at both ends, the circuit will have a current through, then between the two ends there Seebeck electromotive force - thermal EMF, This is the so-called Seebeck effect. Two different components of the homogeneous conductor for the hot electrode, the higher the temperature end of the work side, the lower end of the temperature free end, the free end is usually at a constant temperature. According to the thermoelectromotive force and temperature as a function of the thermocouple indexing table; indexing table is the free end temperature at 0 ℃ under the conditions obtained, different thermocouples with different index table.
-
Thermocouple wire
Gas thermocouple installation precautions 1. With a thermocouple stove requirements installed in a well-ventilated kitchen, it minimum distance of 1m with the cylinder, but the maximum length of the intake hose should not exceed 2m, stove below and around do not stack flammable items. 2. with a thermocouple of the stove should be placed in the stove is not easy to burn, the height of the stove is generally 70cm. It should be placed in a smooth, under the air into the stove embedded in the installation of cooking stove to be used in the cabinet side wall or anterior wall to open a considerable area of 80cm air inhalation holes, in order to prevent rats from entering the metal mesh should be installed when the device is equipped with the following Baffle, the battery should be reserved for replacement. 3. Stove the back of the wall with a net distance of not less than 10cm, the side wall from the wall is not less than 20cm; if the wall is flammable material, to be affixed to the fire insulation layer, the fire side and stove more Part of not less than 20cm, more than a part of the stove is not less than 80cm. 4. Intake pipe connection must be sealed with a hose connection must take the hose in place, and clamped with a clamp, with soap liquid check should be no leakage. Gas stove with thermocouple In the use of pulse ignition stove, before use should be installed according to positive and negative requirements of the battery. When using the ignition of the "pop" sound becomes slow, the point does not fire, or even point the fire immediately go out, you should replace the battery.
-
Gas bbq grill regulator
A gas regulator is an instrument used to control the flow of shielding gas into the weld zone. Key Features Stable dew point temperature: +3 ℃, stability ± 0.2 ℃ Ambient temperature: +5 ~ 45 ℃ (50 ℃) Stable and balanced pressure and temperature control Built-in sampling pump and condensate drain pump Digital temperature display and flow meter Efficient heat exchanger Delicate and durable
-
High pressure gas regulator
The main technology Well-controlled constant pressure and temperature control system to ensure a constant dew point temperature is not affected by the sample gas and ambient temperature; cooler system is highly efficient continuous operation, non-CFC (chlorofluorocarbon) compression motor filled with environmentally friendly refrigerant R134a; efficient heat exchanger To ensure maximum heat exchange and leak-proof operation; built-in condensate pump to continuously remove condensate and impurities in the filter.